NABL TESTING(IP,IK,LM,PHOTOMETRIC, Electrical Fast Transient, Electrostatic Discharge, Power Frequency Magnetic Field, Surge test)/RF TESTING FOR WIRELESS PRODUCT

• 1. IP TESTING


• 2. IK TESTING


• 3. LM TESTING


• 4. ELECTRICAL FAST TRANSIENT TEST


• 5. ELECTROSTATIC DISCHARGE TEST
• 6. POWER FREQUENCY MAGNETIC FIELD TEST
• 7. SURGE TEST
• 8. VIBRATION TESTING
• 9. SFRA(SWEEP FREQUENCY RESPONSE ANALYSIS)
• 10. GRID CODE COMPLIANCE TESTING AND TUNING
• 11. RF TESTING FOR WIRELESS PRODUCTS

INGRESS PROTECTION(IP) RATING

The Ingress Protection rating (IP Rating) system is a classification system, that in a nutshell, provides you with the levels of protection you’re receiving from solid objects and liquids. The standard aims to provide users with more detailed information than vague marketing terms such as waterproof.

In a perfect world, every device will be able to withstand sand, dust, and water to some extent, not all devices. The Ingress Progress rating classification system, for solid objects and liquids.

The basic standards for IP rating are IS/IEC 60529. The standard aims to provide users with more detailed information than vague marketing terms such as waterproof. The first digit represents protection against ingress of solid objects, while the second digit represents protection against ingress of liquids; the higher the value, the greater the protection.

The Degree of Protection provided by an enclosure is indicated by the IP coding such as IPXXCH

IP – IP is the Code letters

X – First Characteristics numeral – Dust Protection(numerals 0-6 or latter X)

X – Second Characteristics numeral – Water Protection(numeral 0-8 or latter X)

C – Additional Latter – optional, letters A,B,C, D

H – Supplementary letters – optional, letters H, M, S, W

Applicable Standard: IS/IEC 60529:2001

Ingress protection class of enclosures is given in form of IP classification, a two digit coding which is shown below. Fibox has tested the enclosures according to IEC 529 or EN 60529. The latter requires the second digit to be tested from class 6 upwards separately to each level of class, thus the double marking IP 66 / IP 67 indicates that the actual tests have been made for both levels.

Lm TESTING is the approved method for measuring the lumen maintenance of LED packages, arrays, and modules at various temperature. Sampling method and sampling size used shall be mentioned in report. LM-TESTING is a testing procedure on the lifespan of LEDs.

The repetitive fast transient test is a test with bursts consisting of a number of fast transients, coupled into power supply, control and signal ports of electrical and electronic equipment. Significant for the test are the short rise time, the repetition rate and the low energy of the transients.

RF Testing Definition/Description: ... RF is any frequency within the electromagnetic spectrum associated with radio wave propagation. When an RF current is supplied to an antenna, an electromagnetic field is created that then is able to propagate through space. Many wireless technologies are based on RF field propagation.

WE ARE PROVIDING ALL THE NABL CERTIFIED REPORTS